{"id":21568,"date":"2025-10-24T16:16:28","date_gmt":"2025-10-24T14:16:28","guid":{"rendered":"https:\/\/www.multitech3d.com\/?post_type=product&p=21568"},"modified":"2025-10-24T16:19:43","modified_gmt":"2025-10-24T14:19:43","slug":"bambu-pva","status":"publish","type":"product","link":"https:\/\/www.multitech3d.com\/es\/producto\/bambu-pva\/","title":{"rendered":"Bambu PVA"},"content":{"rendered":"
\n
\n

Bambu PVA<\/h2>\n

Bambu PVA is a water-dissolvable support material. It provides reliable support for complex designs and overhangs, which can be easily dissolved in water after printing. Compatible with various filaments, it simplifies post-processing and reduces the risk of damaging the printed object during support removal.<\/p>\n<\/div>\n

\n
\n
\"silk<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n
\n

Soak and Dissolve for Supporting Intricate Details<\/h3>\n

Bambu PVA possesses the ability to dissolve in water, penetrating deep into the intricacies to provide support where regular supports fall short. With Bambu PVA you can design and print models that were previously impossible.<\/p>\n<\/div>\n

<\/div>\n

 <\/p>\n<\/div>\n<\/div>\n

<\/div>\n
\n
\n
\n

Seamless Support Interface Surface<\/h3>\n

Water-soluble support material can accommodate zero top interface spacing, guaranteeing a seamless bond with the print surface, resulting in precise and smooth support contact surfaces for your prints.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n
\n
\n
\n
\"silk<\/div>\n<\/div>\n
\n
\"silk<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n
\n

Thorough and Clean Dissolution<\/h3>\n

Bambu PVA utilizes a high-quality formula that dissolves easily and thoroughly in water, effortlessly removing support material and eliminating the hassle of manual cleaning.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n
\n
\"pva<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n

Support Filament Comparision<\/h3>\n
\n\n\n\n\n\n\n\n
<\/td>\nPVA<\/strong><\/td>\nSupport for PLA<\/strong><\/td>\nSupport for PA\/PET<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Compatibility<\/strong><\/td>\nPLA, PLA-CF\/GF<\/td>\nPLA, PLA-CF\/GF<\/td>\nPA, PA-CF\/GF, PA6-CF\/GF
\nPAHT-CF\/GF, PET-CF\/GF<\/td>\n<\/tr>\n
Nozzle Compatibility<\/strong><\/td>\nHotend with Hardened Steel Nozzle 0.4 mm \/ 0.6 mm \/ 0.8 mm
\nHotend with Stainless Steel Nozzle 0.4 mm<\/td>\n		All Size \/ Material<\/td>\nHotend with Hardened Steel 0.4mm \/ 0.6mm (recommended) \/ 0.8 mm<\/td>\n<\/tr>\n
Solubility<\/strong><\/td>\nWater-dissolvable<\/td>\nWater-insoluble<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n

Accessory Compatibility<\/h3>\n
\n\n\n\n\n\n\n\n
<\/td>\nRecommended<\/strong><\/td>\nNot Recommended<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Build Plate<\/strong><\/td>\nCool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate<\/td>\n\/<\/td>\n<\/tr>\n
Hotend<\/strong><\/td>\nHotend with Hardened Steel Nozzle 0.4 mm \/ 0.6 mm \/ 0.8 mm
\nHotend with Stainless Steel Nozzle 0.4 mm<\/td>\n		Hotend with Stainless Steel Nozzle 0.2 mm<\/td>\n<\/tr>\n
Glue<\/strong><\/td>\nBambu Liquid Glue \/ Glue Stick<\/td>\n\/<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n

PVA Hex Code Table<\/h3>\n
\n\n\n\n\n\n
Color<\/td>\nHex Code<\/td>\nDisplay<\/td>\n<\/tr>\n<\/thead>\n
Clear<\/td>\n#F0F1A8<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n
\n

RFID for Intelligent Printing<\/h3>\n

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).<\/p>\n

Load and print! No more tedious setting steps.<\/p>\n<\/div>\n

\"rfid\"<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n
Recommended Printing Settings<\/td>\n<\/tr>\n<\/thead>\n
Drying Settings\u00a0(Blast Drying Oven)<\/td>\n80 \u00b0C, 12 h<\/td>\n<\/tr>\n
Printing and Keeping Container’s Humidity<\/td>\n< 20% RH (Sealed, with Desiccant)<\/td>\n<\/tr>\n
Nozzle Temperature<\/td>\n220 – 250 \u00b0C<\/td>\n<\/tr>\n
Bed Temperature (with Glue)<\/td>\n35 – 45 \u00b0C<\/td>\n<\/tr>\n
Printing Speed<\/td>\n< 200 mm\/s<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n\n\n\n\n\n\n\n\n\n
Physical Properties<\/td>\n<\/tr>\n<\/thead>\n
Density<\/td>\n1.27 g\/cm\u00b3<\/td>\n<\/tr>\n
Vicat Softening Temperature<\/td>\nN \/ A<\/td>\n<\/tr>\n
Heat Deflection Temperature<\/td>\nN \/ A<\/td>\n<\/tr>\n
Melting Temperature<\/td>\n202 \u00b0C<\/td>\n<\/tr>\n
Melt Index<\/td>\n7.2 \u00b1 1.1 g\/10 min<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n\n\n\n\n\n\n\n\n\n
Mechanical Properties<\/td>\n<\/tr>\n<\/thead>\n
Tensile Strength<\/td>\nN \/ A<\/td>\n<\/tr>\n
Breaking Elongation Rate<\/td>\nN \/ A<\/td>\n<\/tr>\n
Bending Modulus<\/td>\nN \/ A<\/td>\n<\/tr>\n
Bending Strength<\/td>\nN \/ A<\/td>\n<\/tr>\n
Impact Strength<\/td>\nN \/ A<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Bambu PVA<\/h1>","protected":false},"featured_media":21569,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[385],"product_cat":[47,37,606,607,608],"product_tag":[152],"class_list":["post-21568","product","type-product","status-publish","has-post-thumbnail","product_brand-basf-filaments-3d-basf-ultrafuse","product_cat-filaments","product_cat-consommables","product_cat-monde-des-makers","product_cat-monde-des-professionnels","product_cat-monde-industriel","product_tag-fdm","product_shipping_class-classique","pa_couleur-transparent","pa_marque-basf","pa_matiere-pa","pa_poids-750-g","pa_technologie-fdm-depot-de-filament","first","onbackorder","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/product\/21568","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/comments?post=21568"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/media\/21569"}],"wp:attachment":[{"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/media?parent=21568"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/product_brand?post=21568"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/product_cat?post=21568"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.multitech3d.com\/es\/wp-json\/wp\/v2\/product_tag?post=21568"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}